The new unique Filtration Centrifuge SIEVA-3 is the advancement of our Centrifuge SIEVA-2.
By an opening in the lid it is possible to fill the centrifugal basket during rotation. The solids remain in the centrifugal basket and the liquid can run off through a opening on the right side. The inspection window in the centrifuge lid is made of safety glass and enables a visual monitoring of the centrifugation.
The SIEVA-3 is very versatile and suitable for various applications. The cmplete housing is made of stainless steel and is therefore also resistant to highly corrosive agents.
The operating principle of this centrifuge is the cake filtration, the filtration in which the required pressure force is generated in the centrifugal field.
The perforated rotor is lined with a filter cloth. Due to the continuous inflow of the suspension, a filter cake builds up in the rotor, while the clarified liquid drains through the rotor casing or on the edge of the basket.
The filtration centrifuge Sieva-3 is mainly used for batch separation of relatively coarse particles or crystalline substances.
• max. Speed: 10000 rpm
• max. RCF: 7825 xg
• max. Volume: 500 ml
• Speed range: 200 - 10000 rpm
• Running time: 59 min 50 s / 10 s, 99 h 59 min / 1 min increments or continious run
• Dimensions (WxHxD): 38 cm x 32 cm x 50 cm
• Weight: 37 kg
• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off
• One-hand closing
• Emergency lid lock
• Stainless steel chamber
• Stainless housing
• autoclavable rotors
Display functions
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• Permanent indication of preset and actual values
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion
English (UK) 
Deutsch